How To - Installation Tutorials
Add-A-Zone Installation
Step One
Determine the location for your new speakers and accessories. Use a stud finder or other reliable method to locate studs. Using the templates provided, trace hole positions on surface of wall. Placing a bubble level on either the horizontal or vertical guidelines of template will assist you in leveling the hole pattern.
Step Two
Cut the speaker/accessory mounting hole. Once you have located the wall studs, use the supplied mounting template to trace the cutout hole. Before you actually cut the hole, it is best to double-check all measurements. This helps to insure you won't be fixing any mistakes. If everything seems to be correct, then cutting can begin.
Step Three
Run correct audio/video cable from source location to speaker/accessory locations. Be sure to leave amount of wire at each location (8-10 inches) to complete connection. Install mounting bracket or electrical box (not included) for proper installation. For In-wall installation, you may be able to access the wall stud bay from the basement. For In-ceiling installation, you can access the stud bay from the attic or crawl space above the room.
Step Four
Attach audio/video cable to speaker or accessory plate, being sure to observe polarity, etc. Position speaker/accessory into bracket or E.O. box as shown. Secure in place using provided mounting screws, use caution not to pinch wires/cable.